The ZIPLink™
connection module and cable system eliminates the normally
tedious process of wiring programmable controller I/O to
terminal blocks.
- Simply plug one end of a ZIPLink pre-wired
terminal block cable into your Productivity3000 PAC I/O
module and the other end into a ZIPLink
connector module. It’s that easy.
- ZIPLinks use half the space, at a fraction
of the total cost of terminal blocks
- ZIPLink connection cables are available for most, but
not all Productivity3000 PAC I/O modules (refer to the
selection matrix)
- For wiring I/O modules, we strongly recommend using
pre-wired ZIPLinks wiring systems, which eliminate the need
for hand wiring PAC or PLC I/O modules to terminal blocks.
|
,Zip%20links,%20ZipLink,%20Zip%20Link,%20Ziplink%20cable_files/p3000_slant_ziplink_300.jpg) |
,Zip%20links,%20ZipLink,%20Zip%20Link,%20Ziplink%20cable_files/p3_t_ziplinks_p3000.jpg)
,Zip%20links,%20ZipLink,%20Zip%20Link,%20Ziplink%20cable_files/icon-pdf.gif){kind=icon}